I have a Optiplex 740 with Windows XP that has served me pretty well for several years. Meanwhile, I also have a laptop with Vista that has a busted motherboard - it will not power up but the hard drive is perfectly in tact. I also have a netbook with Windows 7 with a busted screen and a practically new hard drive. Although the XP is good, I would like to upgrade using either the Vista or Windows 7 drives. I have been able to connect each of the drives as secondary hard drives but haven't been able to get them to run their own operating systems on the Optiplex.
Any suggestions? Aiptek media tablet 14000u software download. Beginning with the technical side, a hard drive that has been formatted and had a version of Windows installed while the drive itself is installed in a second computer will not often boot if moved to the first computer (the one you are trying to use). Reason for this is that Windows Setup tailors the drivers for whatever computer it is being installed in. These drivers are seldom the same between two different computers. If the mass storage driver is compatible with the computer to which you are moving the drive, it will sometimes boot, though with errors. From the legal side, what you are attempting to do is not compliant with the End User Licensing Agreement for the versions of Windows you are trying to use. Presumably, the versions of Windows you have on the drives you want to move are from the computers of other manufacturers or perhaps a different model of Dell.
Each computer from the major manufacturers that comes with a version of Windows has a license for specifically that version of Windows which is non transferable to any other computer. That is why they attach the sticker having the Certificate of Authenticity directly to the computer hardware.
Most vendors no longer send an installation disk with their computers, but if they do, you are supposed to use that disk for only one purpose; reinstalling the operating system on that particular computer when you have a crash or you replace the original hard disk drive. Moving a hard drive that has a complete installation of Windows on it from a defunct computer to a second, working, computer, is equivalent to installing a non-legal version of Windows on the second computer. You can use the hard drive on the second computer if you wish, but you are supposed to delete the existing operating system and install a legitimate version of the operating system on the hard drive or simply use the hard drive for additional data storage. Beginning with the technical side, a hard drive that has been formatted and had a version of Windows installed while the drive itself is installed in a second computer will not often boot if moved to the first computer (the one you are trying to use). Reason for this is that Windows Setup tailors the drivers for whatever computer it is being installed in. These drivers are seldom the same between two different computers. If the mass storage driver is compatible with the computer to which you are moving the drive, it will sometimes boot, though with errors.
From the legal side, what you are attempting to do is not compliant with the End User Licensing Agreement for the versions of Windows you are trying to use. Presumably, the versions of Windows you have on the drives you want to move are from the computers of other manufacturers or perhaps a different model of Dell.
Each computer from the major manufacturers that comes with a version of Windows has a license for specifically that version of Windows which is non transferable to any other computer. That is why they attach the sticker having the Certificate of Authenticity directly to the computer hardware. Most vendors no longer send an installation disk with their computers, but if they do, you are supposed to use that disk for only one purpose; reinstalling the operating system on that particular computer when you have a crash or you replace the original hard disk drive.
Moving a hard drive that has a complete installation of Windows on it from a defunct computer to a second, working, computer, is equivalent to installing a non-legal version of Windows on the second computer. You can use the hard drive on the second computer if you wish, but you are supposed to delete the existing operating system and install a legitimate version of the operating system on the hard drive or simply use the hard drive for additional data storage.
Advertisement If you want to split your drive into different sections then you can use partitions to achieve it. Using a default Windows tool called Disk Management, we’re going to talk you through all the terminology and show you how to resize, delete, and create partitions. Essentially, this is a virtual process for adding additional drives. If you want to physically add new drives to your system in order to gain more storage space, see our guide on When you find yourself running out of hard drive space, you can either delete something or add some more space. If you have your own advice to share about managing partitions, be sure to pop down to the comments section. What Are Partitions? A storage drive is a physical component.
This could be inside your system or externally connected. It has a specific capacity limit; if you have no space left for your data then you’ll either need to delete things or buy a new drive. We’re going to be looking at how to partition your drive. Simply put, a partition is a block of space on your drive that Windows will manage separately. A single drive could consist of one or many partitions, and each carries its own drive letter; except for hidden partitions which we’ll touch on later. Using partitions has a number of benefits.
The most common is to separate the operating system from user files. This means that you can reinstall the operating system without losing your data, and also create image backups of each individually.
![]() ![]()
It can also help protect your files. If one your partitions goes bad, it doesn’t necessarily mean that the others will. Understanding Disk Management Windows has a built-in tool called Disk Management which you can use to create, delete, and manage the partitions on your drive. To get started, press Windows key + R to open Run, input diskmgmt.msc and click OK. This will open Disk Management. The top half of the window shows you existing partitions, which Windows calls volumes. The bottom part then represents this data visually.
Each physical drive has its own row and the partitions are shown as separate blocks. For example, you can see in the screenshot above that Disk 0 has a capacity of 931.39 GB (it’s a 1 TB drive, but It is easy to see that 500GB is more than 100GB. But how do different sizes compare? What is a gigabyte to a terabyte? Where does a petabyte fit in? Let's clear it up!
You don’t get that full amount.) The three partitions on the drive shown above are:. EFI System Partition: This is one of the partitions mentioned earlier that doesn’t have a drive letter, but it’s very important. It contains files needed to boot Windows and shouldn’t be deleted. Page File, Primary Partition: This is the main partition on the drive, where nearly all of the files are stored.
Recovery Partition: This partition will help you recover your system should the primary partition become corrupted. This also doesn’t have a drive letter and is hidden. Using Disk Management It’s quite simple to use Disk Management, but it’s important you understand what each feature does so that you’re not accidentally erasing your data. If you’re concerned, Copy the entirety of one hard drive to another. It's called cloning, and it's an important process if you want to replace or upgrade the primary hard drive in your computer.
Cloning isn't the same. Before continuing. Resize a Partition Before you can make a new partition, you first need to create some free space for it by shrinking the size of an existing volume.
To do this, right-click a partition and select Shrink Volume You can only select this if you have free space on the drive. Input a value into the Enter the amount of space to shrink in MB field.
For example, if I wanted to shrink a 100 GB partition by 50 GB, I’d input 50000 (there are roughly 1000 MBs in a GB.) Then click Shrink. If you have an existing partition that you want to be larger, right-click that partition and select Extend Here you need to enter the amount you wish to increase. For more information on this, see our article on In Windows 7 and Windows Vista, resizing your volumes or re-partitioning your hard drive has become a lot easier than in previous Windows versions. However, there are still a few pitfalls that will require you. Delete a Partition You can also free up space by deleting an existing partition. However, be extremely cautious: this will delete everything on your partition. Windows 10 makes data backups effortless.
We have summarized every native backup, restore, recovery, and repair option we could find on Windows 10. Use our simple tips and never despair over lost data again!
Before proceeding because otherwise it’ll be gone forever. If you’re sure you wish to do this, right-click a partition and select Delete Volume You’ll then get a warning message. To finalize the delete, click Yes. Create a Partition A black block represents free drive space. Right-click this and select New Simple Volume A wizard will open to guide you through the process.
In the Simple volume size in MB, input how large you want this partition to be. Remember, 1000 MB equals 1 GB. Here you can assign a drive letter or path. Leave it selected to Assign the following drive letter, but feel free to use the dropdown to select a different letter. On this screen, you can choose to format the partition. Feel free to change the name of the volume with the Volume label field.
Otherwise, leave everything default here unless you’re comfortable with what you’re changing. Check out Do you really know what your hard drive does whenever you read a file from it or write one to it?
Our hard drives can now store massive amounts of data, and that massive space. For more information. The final screen will summarize all the options you’ve selected. Cycle through the Back button if you want to change anything, otherwise click Finish to create your partition. Data Management Master Now you know how to use the Data Management tool you can control your drives like a master. Remember, always be cautious before shrinking or editing existing partitions. You’ll be fine if you follow the advice above.
![]()
If you want to completely wipe a drive, perhaps to remove bloatware, then you can also use Disk Management for that. See our guide on If you have a new HDD or SSD, you should format it.
Through formatting, you can wipe old data, malware, bloatware, and you can change the file system. Follow our step-by-step process. For the details. What do you use drive partitions for? Do you have any tips to share for using Disk Management? Image Credit: Gennady Grechishkin via Shutterstock.com Originally published by James Bruce on 23 January 2011.
A common problem that many users face with Windows Vista is that the operating system fails to identify the second hard disk drive, usually the SATA hard disk drive. Often, the second hard disk drive might be recognized in BIOS, but it won't appear in Windows Vista. To solve this issue, the user has to so to the start menu, choose the computer option and click on storage.
The user should then choose disk management. Once this is done, the user should alter the disk number to online mode. After refreshing, the user will be able to see the second SATA hard disk drive. Issue I recently had a hard disk failure so I re-installed Vista on what was my secondary drive. I then purchased a Hitachi 500g SATA drive.
Unfortunately Vista will not recognize the drive. It doesn't show up in Disk Management. At times it will show in BIOS but not always, and even then it doesn't show in Vista.
How To Install A Second Hard Drive Windows Vista 2
Solution Windows 7 users: Start-right click Computer-Manage-Storage-Disk Management. My second hard drive (both 1TB Western Digitals) was listed as offline. Right click the disc number (mine was Disc 3) and select online. You should be good to go - it worked for me! Note Solved by inkslinger13.
These transmissions incorporated synchronizers (small clutches) which allowed operators to change speeds on the move in each of four ranges and to shuttle-shift between forward and reverse. John deere 1010 crawler serial number location. The Model 1010 had a five-speed sliding-gear manual transmission (four-speed on the crawler); the other tractors featured Syncro-Range transmissions, which provided eight forward and three reverse gears.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |